Wood and wood
derivatives

CW-Cutter
Coated solid carbide end mill
with two flutes
Coated solid carbide end mill with two flutes
Series developed for machining wood and derivatives, with a coating specially designed to protect the cutting edge from the abrasive effects of these materials. It has two cutting helices with a 1º position angle, being the ideal choice for cutting, contouring and grooving

HPL-Cutter
Coated solid carbide end
mill with chipbreaker
Coated solid carbide end mill with chipbreaker
Series made of solid carbide with high wear resistance and designed with a characteristic and innovative gradual chipbreaker. Which acts as an efficient heat sink and cutting stabilizer; allowing machining high-density materials with high feed rates and high-quality finishes.

Endurance Compression HPC
Solid carbide end mill
with Z 2+2
Solid carbide end mill with Z 2+2
Compression series developed with high wear resistance sub-micrograin carbide. It features highly optimized helix geometry and finishes for perfect chip evacuation, allowing its use at high feed speeds. Its design is ideal to achieve perfect finishes and delaminaton free in the outermost layers.

Endurance Downcut HPC
Solid carbide end mill
with Z2
Solid carbide end mill with Z2
Downcut series developed with high wear resistance sub-micrograin carbide.
Geometry designed for trimming, grooving and pocketing getting optimal finishes and free of delamination in the upper part of the workpiece.

Endurance Compression MC
Coated Solid carbide end mill
with Z2+2
Coated Solid carbide end mill with Z2+2
Compression series with high resistance to wear due to the innovative. Endurance MC multilayer coating. Specially formulated to protect and free the cutting edge from the high temperatures generated when machining abrasive materials.

Endurance Downcut MC
Solid carbide end mill
with Z2
Solid carbide end mill with Z2
Downcut series with Endurance MC multilayer coating. Designed for trimming, grooving and pocketing with optimal finishes and delamination free at the top of the workpiece.

Endurance Compression LDC
Coated Solid carbide end mill
with Z 2+2
Coated Solid carbide end mill with Z 2+2
Latest technological advance developed by GRT, which combines an innovative
geometry and our new Endurance LDC coating.
The result is a high performance tool to get perfect finishes, optimizing the productivity of your CNC to the maximum and allowing its use at extreme speeds of up to 40-50 m/min.

Endurance Downcut LDC
Coated solid carbide end mill
with Z2
Coated solid carbide end mill with Z2
Downcut series, like the others homologous series of the same family, is ideal for trimming, grooving and pocketing operations, getting a finish on the upper part free of delamination.
The Endurance LDC coating protects the cutting edge against abrasive effects.

Micro Multix
Solid carbide single flute
end mill with upcut
Solid carbide single flute end mill with upcut
Micro single flute end mill, made of ultrafine grain solid carbide and designed with a very stable geometry optimized for universal use. Indicated for cutting and engraving operations.

MULTIX PRO
Solid carbide single flute
end mill with upcut
Solid carbide single flute end mill with upcut
This series features a polished flute with mirror effect finish and extremely sharp edge developed to obtain a high quality part finishes and high performance in plastics and others materials commonly used in the sign-making sector.

MULTIX PRO Downcut
Solid carbide single flute
end mill with downcut
Solid carbide single flute end mill with downcut
Multix PRO series with downcut, presents a cutting edge extremely sharp and a micro-polished flute with a mirror effect finish, which effectively facilitates chip removal, reducing the risk of milling cutter collapse or obstruction when machining plastic and other kind of materials

MULTIX PRO XL
Solid carbide
end mill with upcut
Solid carbide end mill with upcut
Multix Pro family series, developed with a longer overall length (L1), a longer
cut length (L2) or with neck (L3). Ideal for the most demanding machining

ALU Endurance CC
Coated solid carbide end mill
with upcut
Coated solid carbide end mill with upcut
ALU Endurance series with multilayer coating that provides a low coefficient of friction and high resistance to wear. Our innovative coating allows the machining of any type of aluminum alloy, even in dry conditions, without the need for any type of lubrication.

Multix Graver
Engraving solid
carbide end mill
Engraving solid carbide end mill
Engraving series available as standard with three shank diameters (D2): 3mm, 4mm and 6mm; with four opening angles (α): 15º, 36º, 60º and 90º; and with seven different tip diameters (D1) ranging from 0.1mm to 1mm.

Glass Folder
Solid carbide end mill
for plastic folding
Solid carbide end mill for plastic folding
New end mill specially developed for folding plastic materials. It can also be used to bevel and engrave a wide variety of materials.

HELIX Graver
Helical solid carbide end mill
for engraving and folding
Helical solid carbide end mill for engraving and folding
Solid carbide end mill with polished helical helix that facilitates the rapid chip ejection, getting the engraving surfaces clean and free of burrs, both in plastic as non-ferrous metals.

Conical Cutter
Conical brazed
plates end mill
Conical brazed plates end mill
Conical end mill made of solid carbide plates brazed, specially designed for chamfering. Thanks to its geometry, this tool is very efficient in the machining.

S-Cutter
Surface Milling
Cutter
Surface Milling Cutter
End mill developed in two versions:
with brazed or interchangeable plates (references with (*) in the table below), in both cases made of hard metal. Specially designed for surfacing the spoilboard on CNC routers.

RC-CUTTER
Brazed plates end mill
with radius
Brazed plates end mill with radius
Radius end mill with brazed solid carbide plates, especially designed for milling with radius on top edge. Suitable for cutting operations.

PCD Master 1
PDC single flute
end mill
PDC single flute end mill
High density polycrystalline diamond end mill with high wear resistance. Its design is highly stable, allowing to obtain high cutting performance in the machining of different materials.

PCD HD Master
PCD end mill
with Z2 and Z3
PCD end mill with Z2 and Z3
New end mill designed in HD PCD for high feed cutting and grooving of highly abrasive materials.

V-Master
PCD end mill for 95º and
135º folding
PCD end mill for 95º and 135º folding
New HD PCD cutter developed for grooving, chamfering and high-feed folding of highly abrasive materials.

Conical Cutter PCD HD
PCD end mill for beveling and
folding to 90º
PCD end mill for beveling and folding to 90º
New compression cutter designed to carry out bevels, miter joints and folding operations in materials with surface layers prone to delamination.
Its unique design allows you to perform these operations at high feed, avoiding delamination and maximizing productivity.

SAW Cutter
Saw end mill
with shank
Saw end mill with shank
Saw end mill with brazed solid carbide lates. Designed for grooving materials.

Saw blade Balanced-Cut
Ultra-fine
PCD saw
Ultra-fine PCD saw
New ultra-fine PCD saw blade optimized for universal use. It allows to obtain a high finishes quality, free of delamination both in the upper and lower part of the workpiece.

Multix Drill S3
Solid carbide drill
with Ø3 mm shank
Solid carbide drill with Ø3 mm shank
Solid carbide drill, designed with shank diameter (D2) of 3 mm and tip angle of 130º.
From drilling diameter (D1) of 3.1mm to 6mm, the point angle changes to 165º.

Multix Drill S6
Solid carbide drill
with Ø6 mm shank
Solid carbide drill with Ø6 mm shank
Solid carbide drill designed with a shank diameter (D2) of 6 mm and a tip angle of 130º ground on all four faces, which allows good self-centering when drilling. The helixs are micropolished to facilitate chip removal.
Contact
- Av. Carlos III, 9, 41439 Cañada Rosal, Sevilla
- tecnico@grt-tools.com
Copyright © 2021 by GRT-Tools. All rights reserved. Designed by GRT-Tools