Plastics, solid surface materials and foams
Micro Multix
Solid carbide single flute
end mill with upcut
Solid carbide single flute end mill with upcut
Micro single flute end mill, made of ultrafine grain solid carbide and designed with a very stable geometry optimized for universal use. Indicated for cutting and engraving operations.
MULTIX PRO
Solid carbide single flute
end mill with upcut
Solid carbide single flute end mill with upcut
This series features a polished flute with mirror effect finish and extremely sharp edge developed to obtain a high quality part finishes and high performance in plastics and others materials commonly used in the sign-making sector.
MULTIX PRO Downcut
Solid carbide single flute
end mill with downcut
Solid carbide single flute end mill with downcut
Multix PRO series with downcut, presents a cutting edge extremely sharp and a micro-polished flute with a mirror effect finish, which effectively facilitates chip removal, reducing the risk of milling cutter collapse or obstruction when machining plastic and other kind of materials
MULTIX PRO XL
Solid carbide
end mill with upcut
Solid carbide end mill with upcut
Multix Pro family series, developed with a longer overall length (L1), a longer
cut length (L2) or with neck (L3). Ideal for the most demanding machining
Balanced-Cut
Solid carbide end mill
with upcut
Solid carbide end mill with upcut
Innovative geometry characterized by a high polished flute and a cutting edge design that allows a stable and vibration-free cut, even in machining conditions in which high feed rate is required and a depth of pass greater than 2 x D1.
Gloss-Cut
Solid carbide end mill
with upcut
Solid carbide end mill with upcut
End mill specially developed to obtain exceptional surface finish quality in thermoplastics, even cutting at high feed rates.
This innovative geometry allows optimal finishing in single cutting step.
Gloss-Cut Z2
Solid carbide end mill
with upcut
Solid carbide end mill with upcut
Homologous series to the Gloss-Cut series, but with two cutting edges.
One Step-Cutter
Single flute end mill with
chamfer or radius on top
Single flute end mill with chamfer or radius on top
Single flute end mill with chamfer or radius, specially designed to cut the workpiece and at the same time milling a chamfer or radius on the top edge of it in a single step.
Ball Nose Multix 1
Spherical solid carbide
single flute end mill
Spherical solid carbide single flute end mill
Single flute end mill with spherical tip made of with ultra-fine grain solid carbide.
It has been developed with a very stable geometry and optimized for universal use.
Ball Nose Multix 2
Spherical solid carbide
end mill with two flutes
Spherical solid carbide end mill with two flutes
Spherical two flutes end mill made of ultra-fine grain solid carbide. Specially designed to obtain perfect finishing surfaces after the previous roughing process.
New long references with neck are included for machining operations that requires great depth, see (*).
FOAM-Cutter
Solid carbide end mill
with three flutes
Solid carbide end mill with three flutes
Series with a specially developed geometry for machining foams. The flute surface with mirror effect has been implemented to achieve an extremely acute cutting edge that allows an exquisite finishing on material surface.
Multix Graver
Engraving solid
carbide end mill
Engraving solid carbide end mill
Engraving series available as standard with three shank diameters (D2): 3mm, 4mm and 6mm; with four opening angles (α): 15º, 36º, 60º and 90º; and with seven different tip diameters (D1) ranging from 0.1mm to 1mm.
Glass Folder
Solid carbide end mill
for plastic folding
Solid carbide end mill for plastic folding
New end mill specially developed for folding plastic materials. It can also be used to bevel and engrave a wide variety of materials.
HELIX Graver
Helical solid carbide end mill
for engraving and folding
Helical solid carbide end mill for engraving and folding
Solid carbide end mill with polished helical helix that facilitates the rapid chip ejection, getting the engraving surfaces clean and free of burrs, both in plastic as non-ferrous metals.
Conical Cutter
Conical brazed
plates end mill
Conical brazed plates end mill
Conical end mill made of solid carbide plates brazed, specially designed for chamfering. Thanks to its geometry, this tool is very efficient in the machining.
S-Cutter
Surface Milling
Cutter
Surface Milling Cutter
End mill developed in two versions:
with brazed or interchangeable plates (references with (*) in the table below), in both cases made of hard metal. Specially designed for surfacing the spoilboard on CNC routers.
RC-CUTTER
Brazed plates end mill
with radius
Brazed plates end mill with radius
Radius end mill with brazed solid carbide plates, especially designed for milling with radius on top edge. Suitable for cutting operations.
SAW Cutter
Saw end mill
with shank
Saw end mill with shank
Saw end mill with brazed solid carbide lates. Designed for grooving materials.
Polishing Cutter
PDC super finishing end mill
for cutting and engraving
PDC super finishing end mill for cutting and engraving
New series for cutting and engraving manufactured with high density PCD very resistant to wear and with a specific sharpening that allows to get a very sharp edge designed to polish and obtain cutting surfaces with a high level of brightness or transparency.
Conical Cutter PCD HD
PCD end mill for beveling and
folding to 90º
PCD end mill for beveling and folding to 90º
New compression cutter designed to carry out bevels, miter joints and folding operations in materials with surface layers prone to delamination.
Its unique design allows you to perform these operations at high feed, avoiding delamination and maximizing productivity.
RafTec Compresion
Micro serrated compression
carbide end mill
Micro serrated compression carbide end mill
New series specially designed for cutting sandwich materials with a cell or honeycomb core. Its compression geometry generates a burr-free finish on the upper and lower part of the cut, and the innovative micro-serrated helix design allows the perfect milling
Saw blade Balanced-Cut
Ultra-fine
PCD saw
Ultra-fine PCD saw
New ultra-fine PCD saw blade optimized for universal use. It allows to obtain a high finishes quality, free of delamination both in the upper and lower part of the workpiece.
Multix Drill S3
Solid carbide drill
with Ø3 mm shank
Solid carbide drill with Ø3 mm shank
Solid carbide drill, designed with shank diameter (D2) of 3 mm and tip angle of 130º.
From drilling diameter (D1) of 3.1mm to 6mm, the point angle changes to 165º.
Multix Drill S6
Solid carbide drill
with Ø6 mm shank
Solid carbide drill with Ø6 mm shank
Solid carbide drill designed with a shank diameter (D2) of 6 mm and a tip angle of 130º ground on all four faces, which allows good self-centering when drilling. The helixs are micropolished to facilitate chip removal.
Contact
- Av. Carlos III, 9, 41439 Cañada Rosal, Sevilla
- tecnico@grt-tools.com
Copyright © 2021 by GRT-Tools. All rights reserved. Designed by GRT-Tools